HP LaserJet 4350 HP LaserJet 4250/4350 Series - User Guide - Page 180
Fs] Dimm In Slot X, Tray Xx To Lift
View all HP LaserJet 4350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Interpreting control-panel messages (continued) Control panel message Description Recommended action Unable to store job alternates with The print job named cannot be stored due to a memory, disk, or configuration problem. Correct the error and then try again to store the job. UNSUPPORTED DATA ON [FS] DIMM IN SLOT X To clear press The data on the DIMM is not supported. [FS] stands for either ROM or FLASH. The DIMM may need to be replaced. Turn the printer power off before removing it. Press (SELECT button) to continue. USE TRAY XX [TYPE][SIZE] To change press / To use press The printer did not detect the type and size of media requested. The message shows the most likely type and size available and the tray in which they are available. Press (SELECT button) to accept the values in the message, or use (UP button) and (DOWN button) to scroll through the available choices. WAITING FOR TRAY XX TO LIFT alternates with The specified tray is in the process of lifting the paper to the top of the tray for proper feeding. No action necessary. WARMING UP alternates with The printer is coming out of powersave No action necessary. mode. Printing will continue as soon as it is done. 168 Chapter 4 Problem solving ENWW