HP LaserJet 4350 HP LaserJet 4250/4350 Series - User Guide - Page 224

Tray [N] Custom, UNIT OF MEASURE

Page 224 highlights

Item TRAY [N] SIZE Tray [N] Custom Values *LETTER LEGAL A4 UNIT OF MEASURE X DIMENSION Y DIMENSION Explanation Use this item to set the value to correspond with the media size that is currently loaded in the specified tray, where [N] is the number of the tray. This item appears only if an optional tray is installed. The available sizes might vary depending upon the optional feeder device that is installed. This item appears only if a tray is set to a custom size. UNIT OF MEASURE: Use this option to select the unit of measure to use when you set custom paper sizes for the specified tray. X DIMENSION: Use this item to set the measurement of the width of the paper (measurement from side to side in the tray). The options are 3.0 to 8.50 INCHES or 76 to 216 MM. Y DIMENSION: Sets the measurement of the length of the paper (measurement from front to back in the tray). The options are 5.0 to 14.00 INCHES or 127 to 356 MM. After the Y DIMENSION value is selected, a summary screen appears. This screen contains feedback that summarizes all the information that was specified on the previous three screens, such as TRAY 1 SIZE= 8.50 x 14 INCHES, Setting saved. 212 Appendix B Control panel menus ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304

Item
Values
Explanation
TRAY [N] SIZE
*LETTER
LEGAL
A4
Use this item to set the value to
correspond with the media size
that is currently loaded in the
specified tray, where [N] is the
number of the tray.
This item appears only if an
optional tray is installed. The
available sizes might vary
depending upon the optional
feeder device that is installed.
Tray [N] Custom
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
This item appears only if a tray
is set to a custom size.
UNIT OF MEASURE
: Use this
option to select the unit of
measure to use when you set
custom paper sizes for the
specified tray.
X DIMENSION
: Use this item
to set the measurement of the
width of the paper
(measurement from side to
side in the tray). The options
are
3.0 to 8.50 INCHES
or
76
to 216 MM
.
Y DIMENSION
: Sets the
measurement of the length of
the paper (measurement from
front to back in the tray). The
options are
5.0 to 14.00
INCHES
or
127 to 356 MM
.
After the Y DIMENSION value
is selected, a summary screen
appears. This screen contains
feedback that summarizes all
the information that was
specified on the previous three
screens, such as
TRAY 1
SIZE= 8.50 x 14 INCHES,
Setting saved
.
212
Appendix B
Control panel menus
ENWW