HP LaserJet 4350 HP LaserJet 4250/4350 Series - User Guide - Page 182
Xx.yy Jam In, Firmware In External Accessory
View all HP LaserJet 4350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Light Blinking amber Explanation and solution ● The accessory has a staple jam. 13.XX.YY JAM IN STAPLER appears on the printer control-panel display. (See the section for this message in Interpreting control-panel messages.) ● The accessory has a paper jam, or a sheet needs to be removed from the unit, even if the sheet is not jammed. 13.XX.YY JAM IN OUTPUT DEVICE appears on the printer control-panel display. (See the section for this message in Interpreting control-panel messages.) ● The bin is full. STACKER BIN FULL appears on the printer control-panel display. (See the section for FULL in Interpreting control-panel messages.) ● The stapler is out of staples. STAPLER OUT OF STAPLES appears on the printer control-panel display. (See the section for this message in Interpreting control-panel messages.) ● The bin is in the up position. LOWER THE STACKER BIN appears on the printer control-panel display. (See the section for this message in Interpreting control-panel messages.) ● The jam-access door is open. OUTPUT PAPER PATH OPEN appears on the printer control-panel display. (See the section for this message in Interpreting control-panel messages.) ● The stapler unit is open. OUTPUT PAPER PATH OPEN appears on the printer controlpanel display. (See the section for this message in Interpreting control-panel messages.) ● The firmware is corrupt. CORRUPT FIRMWARE IN EXTERNAL ACCESSORY appears on the control-panel display. (See the section for this message in Interpreting control-panel messages.) 170 Chapter 4 Problem solving ENWW