Hitachi DZ GX5020A Owners Guide - Page 132

English Message Cause & Troubleshooting Reference page Disc error has occurred. • Use another disc. • See *3 and *4 on page 135. 10, 22 • Mismatch in recording information may be caused by editing done on some device other than this DVD video camera/ recorder. 97 Initialize the disc or use another disc. • Initializing the disc will erase all data on it. Disc full. Cannot execute. Delete unnecessary scenes before using this disc, or use another disc. 77 Disc has no data. This message will appear when an attempt is made to execute playback or editing on Disc Navigation with no scene recorded. - Disc has no PlayList. Switching of play list was selected with no play list stored. 91 Disc includes protected The disc may be software protected from a device other than this scenes. Delete scenes? DVD video camera/recorder. To release this case, use a device - that has executed software-protect. Disc is full. Cannot add control info. The number of entered scenes has reached the limit that can be entered, so the control information for generating thumbnails cannot be added. Combine several scenes or delete them. 77, 79 Disc is not formatted. • Has the disc been initialized on a PC? Format the disc now? Choose "YES" and initialize the disc when using it on this DVD video camera/recorder. Initialization will delete all data on the 97 disc. • See *2 on page 134. Disc must be finalized • This message will appear if you remove a DVD-RW (VF-mode)/ before it can be played back on DVD player or DVD-R that has not been finalized from the DVD video camera/ recorder. 106 DVD recorder. • See *5 on page 135. Drive overheat. Please The temperature inside the DVD video camera/recorder is too retry later. high, and reading or writing of the data on disc may not be performed normally. Turn the DVD video camera/recorder off and wait for a while. The 29 temperature will be effectively decreased if the DVD video camera/recorder is placed in a well-ventilated spot. DVD-R* Disc, 16:9 With DVD-RW (VF-mode)/DVD-R/+RW disc, the setting of 16:9 mode cannot be mode will not be possible when the Video mode is STD. changed, when Video * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode), 61 mode is STD. "+RW" will appear when using a +RW. DVD-R* Disc, Video With DVD-RW (VF-mode)/DVD-R disc, the movie quality mode mode and 16:9 mode and 16:9 mode once used for recording cannot be changed. 61 cannot be changed. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode). DVD-RAM disc. Finalize This message will appear if you press the FINALIZE button with a is not required. DVD-RAM loaded in this DVD video camera/recorder. No 100 finalization is necessary for a DVD-RAM. END OF CARD No more recording on this card can be done: Delete unnecessary stills or use another card. 77, 145 132