Hitachi DZ GX5020A Owners Guide - Page 26

Battery charged status, ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER, REMOVING BATTERY - battery charger

Page 26 highlights

English ●Battery charged status You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/ charger: Charge status During charge Charge complete CHARGE indicator Lit Goes out Note: See "Troubleshooting" on page 135 when the CHARGE indicator blinks. ●Reference for time required to charge battery (at approx. 77ºF (25ºC)) DZ-BP07PW (provided)/DZ-BP7SW (optional): Approx. 90 minutes DZ-BP14SW (optional): Approx. 165 minutes The charge time will vary depending on the remaining power level of battery. ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER 1 Fit the battery to the battery attachment platform on this DVD video camera/recorder and slide it downward until a click is heard. Note: • Make sure that the battery is in the correct orientation. • Make sure that the battery is securely attached: Incomplete attachment could cause the battery to fall, resulting in damage. Terminal side must be down. REMOVING BATTERY After using the DVD video camera/recorder, remove the battery from it. 1 While holding down the BATTERY EJECT button, slide the battery upward to remove it. Note: • For safety, be sure to turn the DVD video camera/ recorder off before attaching or removing the battery. • Be careful not to drop the removed battery. • If the battery remains attached, minute level current will flow even if the DVD video camera/recorder is off, and the battery will discharge. • Set the power switch to OFF before removing the battery. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158

English
26
Battery charged status
You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/
charger:
Note
:
See “Troubleshooting” on page 135 when the CHARGE indicator blinks.
Reference for time required to charge battery (at approx. 77ºF (25ºC))
DZ-BP07PW (provided)/DZ-BP7SW (optional): Approx. 90 minutes
DZ-BP14SW (optional): Approx. 165 minutes
The charge time will vary depending on the remaining power level of battery.
ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER
1
Fit the battery to the battery attachment
platform on this DVD video camera/recorder
and slide it downward until a click is heard.
Note
:
Make sure that the battery is in the correct orientation.
Make sure that the battery is securely attached:
Incomplete attachment could cause the battery to fall,
resulting in damage.
REMOVING BATTERY
After using the DVD video camera/recorder, remove the battery from it.
1
While holding down the BATTERY EJECT
button, slide the battery upward to remove it.
Note
:
For safety, be sure to turn the DVD video camera/
recorder off before attaching or removing the battery.
Be careful not to drop the removed battery.
If the battery remains attached, minute level current
will flow even if the DVD video camera/recorder is off,
and the battery will discharge.
Set the power switch to OFF before removing the
battery.
Charge status
CHARGE indicator
During charge
Lit
Charge complete
Goes out
Terminal
side must
be down.