Hitachi DZ GX5020A Owners Guide - Page 59
Using The Electronic Image Stabilizer Eis, Recording Subject Using Large Magnification Digital Zoom
UPC - 050585223875
View all Hitachi DZ GX5020A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
English USING THE ELECTRONIC IMAGE STABILIZER (EIS) When you use zoom (see page 50) to record a magnified subject image, it will correct fuzziness in the recorded image. 1 Press the MENU button, choose "EIS" on the "Camera Functions Setup" menu screen, and then press the A button. 2 Choose the "On" or "Off", and then press the A button. 3 Press the MENU button to end the setting. Note: • You can check EIS On or Off by the on-screen information display. • The EIS setting will be stored in memory even when the DVD video camera/recorder is turned off. • After recording with EIS set to "Off", it is recommended that you return the setting to "On" and then turn the DVD video camera/recorder off, unless you normally record with "Off" setting. • It is recommended that you specify "EIS Off" when using the DVD video camera/recorder on a desk or tripod. • When "EIS On" is specified, there will be a slight difference between the actual movement and the movement on screen. • Gross camera shake may not be entirely corrected even if "EIS On" is specified: Firmly hold the DVD video camera/recorder with both hands. • EIS may not operate correctly when the tele or wideconversion lens is used. RECORDING SUBJECT USING LARGE MAGNIFICATION (DIGITAL ZOOM) See page 50 for setting on digital zoom. REDUCING WIND NOISE DURING RECORDING (MIC.FILTER) When recording sound from the microphone built into this DVD video camera/recorder, you can reduce wind noise in recording. If "MIC.Filter: ON" is specified, the low-frequency components in the sound picked up by microphone will be cut off during recording: This makes it easier to hear the target voice or sound during playback. 1 Press the MENU button, choose "MIC.Filter" on the "Camera Functions Setup" menu screen, and then press the A button. 2 Choose the desired option, and then press the A button. 3 Press the MENU button to end the setting. Note: • You can also use the on-screen display to confirm that the MIC.Filter has been set. • The MIC.Filter setting will be stored in memory even when the DVD video camera/recorder is turned off. • The MIC.Filter function will work only during movie recording. 59