IBM 887022X Maintenance Manual - Page 106
DVD-ROM, drive
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
External removable media bays NOTE: FOR PROPER FRONT OF BOX AIRFLOW, NOTE: FOR PROPER AIRFLOW, FRONT OF BOX REPLACE FAN WITHIN 2 MINUTES REPLACE FAN WITHIN 2 MINUTES Diskette drive Diskette drive eject button Tab Figure 43. Installing a diskette drive 6. If you have other options to install or remove, do so now. Otherwise, connect the power cords and turn on the server. DVD-ROM drive The following notes contain information that you must consider when installing a DVD-ROM: v Your xSeries 445 server supports the installation of up to two DVD-ROM drives. v If no other IDE drives are installed, the diskette drive must be installed in the right external removable media bay. CD-ROM or DVD-ROM drives can be installed in either external removable media bay. Complete the following steps to remove and install a DVD-ROM drive in the server: 1. Review the information in "Installation guidelines" on page 79 and "Safety information" on page 257. Attention: The IDE drives installed in the server are not hot-swappable. 2. Turn off the server and disconnect the power cords from the back of the server. 3. Push the DVD-ROM eject button to the right. 4. Using the tab, pull the DVD-ROM drive partially out of the server; then, grasp the drive and remove it from the server. 5. Install the new DVD-ROM drive: a. Inspect the drive for any signs of damage. b. Slide the DVD-ROM drive into the drive bay until it stops. 96 xSeries 445 Type 8870: Hardware Maintenance Manual and Troubleshooting Guide