IBM 887022X Maintenance Manual - Page 255
procedures
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
Note: See Chapter 8, "Parts listing, Type 8870," on page 249 to determine which components are replaceable by the customer, and which components should be replaced by an IBM field service technician. Error code/symptom FRU/action 7xxx thru 8xxx (Host/local PCI bus interface error) 1. Flash latest level of BIOS code and firmware for controller. 2. If ServeRAID-4x controller, replace controller. 3. If ServeRAID-5i controller, integrated RAID controller on the server. 9003 1. Flash latest level of BIOS code and firmware for controller. 2. Confirm that this controller is a supported option for this system. 3. ServeRAID controller. 4. Integrated RAID controller on the server). 9xxx thru BZxx (SCSI bus error caused by cables, 1. Follow indications at "ServeRAID (ISPR) error termination, defective drives, etc.). Z refers to the specific procedures" on page 242. Follow those channel or channels that cause the error. instructions before continuing with the next steps listed in this index. 2. Hard disk drive cable. 3. Hard disk drive backplane. 4. Hard disk drive. 5. ServeRAID controller. EFFE (Firmware code corrupt or download jumpers are in 1. Flash latest level BIOS and firmware for place) controller; then, remove jumpers. 2. ServeRAID controller. FFFF or other code not listed 1. Follow indications at "ServeRAID (ISPR) error procedures" on page 242. 2. Hard disk drive cable. 3. Hard disk drive backplane. 4. Hard disk drive. 5. ServeRAID controller. Chapter 7. Symptom-to-FRU index 245