IBM 887022X Maintenance Manual - Page 86
Ethernet, controller, troubleshooting
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
1 23 Jumper (J28) 4. Move the jumper from pins 1 and 2 to pins 2 and 3 to enable the BIOS back page. 5. Reconnect all external cables and power cords and turn on the peripheral devices. 6. Insert the BIOS flash diskette into the diskette drive. 7. Restart the server. The system begins the power-on self-test (POST) and BIOS flash. 8. Select 1 - Update POST/BIOS from the menu that contains various flash (update) options. 9. When prompted as to whether you want to save the current code to a diskette, press N. 10. When prompted to choose a language, select a language (from 0 to 7) and press Enter to accept your choice. 11. Do not restart the system at this time. 12. Remove the BIOS flash diskette from the diskette drive. 13. Turn off the server. 14. Move the jumper on J28 to pins 1 and 2 to return to normal startup mode. 15. Replace fans 3 and 4 (see "Replacing fans 3 and 4" on page 123). 16. Restart the server. 17. Replace the cover (see "Closing the cover" on page 125). Ethernet controller troubleshooting The method of testing the Ethernet controller depends on which operating system is being used (see the Ethernet controller device driver README file). You can use the Ethernet wrap test to determine if a hardware problem is causing the Ethernet connection to fail. To perform the Ethernet wrap test, use the wrap plug (FRU 48P9494) with the diagnostic tests. Note: The wrap plug connects to the Ethernet port. Do not connect the wrap plug to the serial port of the Remote Supervisor Adapter. 76 xSeries 445 Type 8870: Hardware Maintenance Manual and Troubleshooting Guide