IBM 887022X Maintenance Manual - Page 23
Configuration
UPC - 000435151957
View all IBM 887022X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 2. Configuration The following configuration programs are provided with the server: v Configuration/Setup Utility The Configuration/Setup Utility program is part of the basic input/output system (BIOS) code in the server. Use it to configure management port assignments, change interrupt request (IRQ) settings, change the startup-device sequence, set the date and time, and set passwords. See "Using the Configuration/Setup Utility program" on page 14 for more information. Notes: 1. In a 16-way configuration some options or settings are defined through the primary server, while others must be defined on the individual server. Ensure that options or settings on the secondary server are correct before creating a scalable partition. 2. For information on creating, deleting, and configuring scalable partitions, see "Scalable partitions" on page 140. v IBM ServerGuide Setup and Installation CD The ServerGuide™ program provides software-setup tools and installation tools that are designed for the server. Use this CD during the installation of the server to configure basic hardware features, such as an integrated SCSI controller with RAID capabilities, and to simply the installation of your operating system. For information about using this CD, see "Using the ServerGuide Setup and Installation CD" on page 20. Notes: 1. If you are installing a Linux-based operating system, do not install the default ATI video driver. Instead, install the Video Electronics Standards Association (VESA) video driver and set the resolution to 1024 x 768. 2. If the server model comes with an operating system, such as Microsoft® Windows 2000 Datacenter Server or VMware ESX server, see the software documentation provided with your software for configuration information v Ethernet controller configuration To configure the integrated Ethernet controller, see "Configuring the Gigabit Ethernet controller" on page 24. v Integrated system management firmware update utility program For information about updating the integrated system management firmware, see "Updating the integrated system management firmware" on page 24. v LSI Logic Configuration Utility Use the LSI Logic Configuration Utility to configure the integrated SCSI controller with RAID capabilities and the devices that are attached to it. For information about using this utility program, see "Using the LSI Logic Configuration Utility program" on page 25. v ServeRAID Manager ServeRAID™ Manager is available as a stand-alone program and as an IBM Director extension. If a ServeRAID adapter is installed in the server or if you are using the RAID capabilities of the integrated SCSI controller, use ServeRAID Manager to define and configure your disk-array subsystem before you install the operating system. For information about using this program, see "Using ServeRAID Manager" on page 25 for more information. © Copyright IBM Corp. 2003 13