IBM 887022X Maintenance Manual - Page 54

Remote system management administrator's system Modem Dial-out only Modem Modem xSeries 445 xSeries 445 xSeries 445 Management port RS-485 terminator plug ASM Interconnect module RS-485 terminator plug Note: The ASM Interconnect module is connected to the RS-485 port on the back panel of the Remote Supervisor Adapter in each server. Figure 21. ASM interconnect network modem configuration Setting up the Remote Supervisor Adapter This section describes features, setup requirements, and how to cable and configure the Remote Supervisor Adapter for use on an Advanced System Management (ASM) network so that you can manage the server from a remote location. Note: The information in this section is intended for use with the Remote Supervisor Adapter, not the Remote Supervisor Adapter II-EXA. For information on setting up and configuring a Remote Supervisor Adapter II-EXA go to "Setting up the Remote Supervisor Adapter II-EXA" on page 33. For more detailed information, see the Remote Supervisor Adapter User's Guide on the IBM xSeries Documentation CD. Remote Supervisor Adapter features Standard features of the Remote Supervisor Adapter are as follows: v Continuous health monitoring and control v Advanced Predictive Failure Analysis (PFA) v Configurable notification and alerts 44 xSeries 445 Type 8870: Hardware Maintenance Manual and Troubleshooting Guide