Kyocera TASKalfa 3501i Kyocera Command Center RX User Guide Rev-2013.02 - Page 65

Network Settings Settings. To enable this item, select Network Authentication on the Authentication Settings page under Management Settings. Select a method for LDAP Security (DSM Scan) from Off, STARTTLS, or SSL/ TLS on the drop-down list. To enable this item, activate SSL on the Network Security Settings page under Security Settings. Other Protocols This section allows to configure other network protocols. This section includes the following items for configuration: 1. SNMPv1/v2c: The SNMP protocol provides and transfers management information within the network environment. Should an error occur such as Add Paper, the printing system automatically generates a trap, an error message sent to up to two predetermined trap recipients. To enable the SNMPv1/v2 protocol, turn this item On. To configure the SNMPv1/v2 protocol, go to the SNMP Settings page under Management Settings. 2. SNMPv3: The SNMP protocol provides and transfers management information within the network environment. To enable the SNMPv3 protocol, turn this item On. To configure the SNMPv3 protocol, go to the SNMP Settings page under Management Settings. 3. HTTP: HTTP is the protocol to exchange or transfer hypertext between the World Wide Web and web browsers. To enable the HTTP protocol, turn this item On. 4. HTTPS: HTTPS (Hypertext Transfer Protocol Secure) is a widely-used communications protocol for secure communication over the Internet. It provides bidirectional encryption of communications between a client web browser and a web server. To enable the HTTPS protocol, turn this item On. To enable this item, activate SSL on the Network Security Settings page under Security Settings. The current status of the certificate is shown in HTTPS Certificate. To make advanced settings, click Settings button and select a device certificate. Click Submit button to finalize settings. Configure the device certificate on the Certificates page under Security Settings. This Certificate can be used in common with IPP over SSL and HTTPS. 5. Enhanced WSD: Enhanced WSD is an API to simplify connections to web service enabled devices, such as Printers, Scanners and File Shares. To enable Enhanced WSD, turn this item On. 6. Enhanced WSD over SSL: Enhanced WSD (SSL) is a communication security protocol that provides encryption, authentication, and anti-tampering integrity over the Internet. To enable Enhanced WSD (SSL), turn this item On. To enable this item, activate SSL on the Network Security Settings page under Security Settings. The status of the certificate is shown in Enhanced WSD over SSL Certificate. To make advanced settings, click Settings button and select a device certificate. Click Submit button to finalize settings. Configure the device certificate on the Certificates page under Security Settings. 7. LDAP: The printing system can refer to the address book which is on the LDAP server as an external address book and assign a FAX number and E-mail address to the destination. To enables the LDAP protocol, turn this item On. To configure the External Address Book, go to the External Address Book Settings page under Address Book. To configure advanced settings, go to Authentication Settings page under Management Settings. Select a method for LDAP Security from STARTTLS, SSL/TLS, and Off on either the External Address Book # or Network Authentication drop-down list. To enable this item, activate SSL on the Network Security Settings page under Security Settings. 8. IEEE802.1x: IEEE802.1x is a security protocol that allows login to the secured networks based on a client certificate. To enable the IEEE802.1x protocol, turn this item On. User Guide 61