Lexmark Optra C710 User's Guide - Page 145
Replacing the fuser kit, Place the printer power switch to off O.
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Replacing the fuser kit Your printer monitors the life of your fuser. When the fuser in your printer is nearing the end of its life, the printer will display 87 Fuser Exhausted on the printer display. This message indicates it is time for you to replace the fuser kit. The fuser kit consists of the fuser unit, and an air filter. Caution! The fuser may be hot. Allow the fuser to cool before touching. To remove the fuser: 1 Place the printer power switch to off (O). 2 Unplug the printer or optional device power cord from the outlet. 3 Press the fuser cover release button. 4 Lift the fuser cover. Release button Power switch Chapter 7: Replacing the fuser kit 131
131
Chapter 7: Replacing the fuser kit
Replacing the
fuser kit
Your printer monitors the life of your fuser. When the
fuser in your printer is nearing the end of its life, the
printer will display
87 Fuser Exhausted
on the printer dis-
play. This message indicates it is time for you to replace
the fuser kit. The fuser kit consists of the fuser unit, and an
air filter.
Caution!
The fuser may be
hot. Allow the fuser to cool
before touching.
To remove the fuser:
1
Place the printer power switch to off (O).
2
Unplug the printer or optional device power cord
from the outlet.
3
Press the fuser cover release button.
4
Lift the fuser cover.
Release button
Power switch