Lexmark Optra C710 User's Guide - Page 181

Other printing problems (continued) Problem Action Transparencies jam. Fan transparencies before loading. Make sure you only load transparencies in tray 1 or the multipurpose feeder. If you just turned the printer on or the printer has been idle for a period of time, print on paper before trying to print on transparencies. For example, before printing transparencies, select Print Menus from the Utilities Menu and print the menu settings page on a sheet of paper. Disabling Power Saver may also prevent transparencies from jamming after the printer has been idle. See page 38 for more information about the Power Saver setting. You cannot remove paper jammed Remove the fuser unit and remove the jammed paper. See page 131 for more in the fuser. information. You cannot clear the paper jam message. To clear the paper jam messages, you must remove all paper from the printer's paper path. Check both inside the printer as well as the paper source you were using. Then open and close the front cover and fuser cover and press Go. The page that jammed does not Set Jam Recovery to Auto or to On in the Setup Menu. See page 41 for more reprint after you clear the jam. information. Chapter 8: Identifying other problems 167