Lexmark Optra C710 User's Guide - Page 53
Setup Menu continued, If Resource Save
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Setup Menu (continued) Menu item Resource Save Values Off* On Download Target The Resource Save setting determines what the printer does with resources downloaded to RAM if the printer receives a job that requires more memory than is available. If Resource Save is On, the printer retains all permanent downloaded resources for all printer languages during language changes and printer resets. If the printer runs out of memory, the message Memory Full appears on the display. If Resource Save is Off, the printer retains permanent downloaded resources only until memory is needed. Your printer deletes those resources stored for the inactive printer language. See page 90 for information about adding memory to your printer. Note: Resource Save requires a minimum amount of available memory. If there is not sufficient memory available, the printer posts insufficient memory and automatically sets Resource Save to off. RAM* Flash Disk Print Timeout The Download Target menu item specifies where you want to store downloaded resources. Storing downloaded resources in flash memory or an optional hard disk is permanent storage rather than the temporary storage that RAM provides. You can add resources to flash memory or disk until the device is full. Use your software application or the MarkVision printer utility to download resources to the printer. The Download Target menu item is only displayed if the flash memory or hard disk is not defective or Read/Write or Write protected. Disk is not an available value for Download Target if Job Buffer Size is set to 100%. Disabled 1...255 (90*) *Factory default The Print Timeout setting determines the time (from 1 to 255 seconds) the printer waits before printing the last page of a print job that does not end with a command to print the page. The print timeout counter does not start until the printer displays the Waiting message. When a print timeout occurs, the printer stores the page in the print buffer. When Print Timeout is disabled, the printer does not print the last page of a print job until one of the following occurs: • The printer receives enough information to fill the page. • The printer receives a Form Feed command. • You select Print Buffer from the Job Menu. See page 35 for more information. Chapter 3: Menus 39