Home » Lexmark Manuals » Laser Printers » Lexmark Optra C710 » Manual Viewer

Lexmark Optra C710 User's Guide - Page 172

Service messages, from the service message error condition. A service mes

Add to My Manuals
Save this manual to your list of manuals

Page 172 highlights

Attendance messages (continued) Message 23x Paper Jam Check Duplex 24x Paper Jam Check Tray x 25x Paper Jam MP Feeder Action The printer has detected a paper jam in the duplex unit. You must remove the paper from the entire duplex unit paper path. Then close any open covers and the duplex tray. Press Go to clear the message. See page 175 for additional instructions on clearing a jam. See page 104 for information about avoiding jams. Note: If the duplex unit is not plugged in, the printer will display 230 Paper Jam Check Duplex. The printer has detected a paper jam in the tray specified in the message. You must remove the paper from the paper path. Then close any open trays or covers. Press Go to clear the message. See page 173 for additional instructions on clearing a jam. See page 104 for information about avoiding jams. The printer has detected a paper jam in the multipurpose feeder. You must remove the paper from the multipurpose feeder and paper path. Then close any open covers. Press Go to clear the message. See page 172 for additional instructions on clearing a jam. See page 104 for information about avoiding jams. Service messages Service messages also alert you to problems that require intervention. However, the printer will stop printing and the errors are non-recoverable. It may be possible to power the printer off and back on to temporarily recover from the service message error condition. A service message normally indicates a service technician is required. Service messages Message 900 Service RIP Software 910-912 Service Engine Motor 917 Service Transfer Belt Action An unrecoverable printer software error has occurred. A service technician is required to correct this condition. Indicates an engine motor problem has occurred. A service technician is required to correct this condition. Indicates an error has occurred in the transfer belt. If Alarm Control is turned on, the alarm is sounded if this error occurs. Replacing the transfer belt usually solves this problem. 158 Chapter 8: Understanding printer messages

Section	Page
Table of contents	3
Using your documentation ix	3
Trademarks xiii	3
1 Introducing your printer 1	3
2 Using printer drivers 5	3
3 Changing printer settings 7	3
4 Using color 75	4
5 Managing memory 89	5
6 Handling paper 95	5
7 Replacing supplies 113	6
8 Solving printer problems 145	6
Appendix A: MarkVision 189	7
Appendix B: Printer specifications 201	7
Appendix C: Fonts 205	7
Appendix D: Safety information 215	7
Appendix E: Notices 227	7
Appendix F: Warranty 239	8
Glossary 241	8
Index 255	8
Using your documentation	9
About the manuals	9
Other sources ofinformation	11
Trademarks	13
Introducing your printer	15
Print speed	16
Memory	16
Color quality	16
Printer drivers	17
MarkVision	17
Paper handling	17
Using printer drivers	19
Changing printer settings	21
Using the operator panel	22
Menus	24
Using color	89
Understanding color	89
Managing color	92
Controlling your printer	94
Color Correction	98
Avoiding print quality problems	100
Managing memory	103
Printer memory	103
Adding memory	104
Flash memory	106
Hard disk	106
Managing resources downloaded to flash or disk	107
Handling paper	109
Paper sources and output bins	109
Paper sizes	110
Media guidelines	112
Storing media	118
Avoiding paperjams	118
Loading paper inthe trays	119
Tray linking	123
Using the multipurpose feeder	124
Replacing supplies	127
Ordering supplies	127
Storing supplies	129
When to replacesupplies	130
Recycling usedsupplies	133
Conserving supplies	133
Replacing supplyitems	134
Replacing print cartridges	135
Replacing the coating roll	140
Replacing the fuser kit	145
Replacing the transfer kit	152
Solving printer problems	159
Printer problems	159
Theory of operation	160
Understanding printer messages	161
Identifying other problems	175
Clearing printer paperjams	182
Clearing duplex unit paperjams	189
Cleaning the print cartridge dust collector	195
Cleaning the waste toner sensor	198
Calling for customer support	202
MarkVision	203
Operating systems supported	203
Introducing MarkVision	204
Installing MarkVision on a network	212
Getting updated utilities and drivers	213
Printer specifications	215
Fonts	219
Printing font samples	219
Resident fonts	220
Symbol Sets	225
Downloadable fonts	227
Safety information	229
Notices	241
Laser notices	245
Warranty	253
Glossary	255
A	255
B	256
C	256
D	257
E	258
F	259
G	259
H	260
I	260
J	260
K	260
L	261
M	261
N	262
O	262
P	263
R	265
S	265
T	267
U	267
V	267
Y	268

Match case Limit results 1 per page

158

Chapter 8: Understanding printer messages

Service messages

Service messages also alert you to problems that require

intervention. However, the printer will stop printing and

the errors are non-recoverable. It may be possible to

power the printer off and back on to temporarily recover

from the service message error condition. A service mes-

sage normally indicates a service technician is required.

Paper Jam Check Duplex

The printer has detected a paper jam in the duplex unit.

You must remove the paper from the entire duplex unit paper path. Then close any

open covers and the duplex tray.

Press

to clear the message. See page 175 for additional instructions on

clearing a jam.

See page 104 for information about avoiding jams.

Note:

If the duplex unit is not plugged in, the printer will display

230 Paper Jam

Check Duplex

Paper Jam Check Tray

The printer has detected a paper jam in the tray specified in the message.

You must remove the paper from the paper path. Then close any open trays or

covers.

Press

to clear the message. See page 173 for additional instructions on

clearing a jam.

See page 104 for information about avoiding jams.

Paper Jam MP Feeder

The printer has detected a paper jam in the multipurpose feeder.

You must remove the paper from the multipurpose feeder and paper path. Then

close any open covers.

Press

to clear the message. See page 172 for additional instructions on

clearing a jam.

See page 104 for information about avoiding jams.

Attendance messages (continued)

Message

Action

Service messages

Message

Action

900 Service RIP Software

An unrecoverable printer software error has occurred. A service technician is

required to correct this condition.

910-912 Service Engine Motor

Indicates an engine motor problem has occurred. A service technician is required

to correct this condition.

917 Service Transfer Belt

Indicates an error has occurred in the transfer belt. If Alarm Control is turned on,

the alarm is sounded if this error occurs. Replacing the transfer belt usually solves

this problem.