Lexmark Optra C710 User's Guide - Page 151
Configuration Menu, Reset Fuser Count, While holding the Select and Return buttons
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
11 Close the fuser cover. Note: When a new fuser is installed, you must reset the fuser counter to zero. Configuration Menu Reset Fuser Count 1 Menu 2 Select 3 Return 4 Go 5 Stop 6 12 Reset the fuser counter to zero. a Make sure the printer power switch is off (O) and the printer is plugged into a properly grounded outlet. b Press and hold the Select and Return buttons on the operator panel. c While holding the Select and Return buttons, place the printer power switch to on (I). The Configuration Menu is displayed on the operator panel. d Press Menu> or
137
Chapter 7: Replacing the fuser kit
11
Close the fuser cover.
Note:
When a new fuser is
installed, you must reset the fuser
counter to zero.
12
Reset the fuser counter to zero.
a
Make sure the printer power switch is off (O)
and the printer is plugged into a properly
grounded outlet.
b
Press and hold the Select and Return buttons
on the operator panel.
c
While holding the Select and Return buttons,
place the printer power switch to on (I).
The
Configuration Menu
is displayed on the opera-
tor panel.
d
Press Menu> or <Menu until
Reset Fuser Count
appears on the second line of the operator
panel.
e
Press
Select
to reset the fuser counter to zero.
Configuration Menu
Reset Fuser Count
1
Menu
2
Select
3
Go
5
Return
4
Stop
6