Lexmark Optra C710 User's Guide - Page 47

Utilities Menu (continued) Menu item Factory Defaults Values Restore Do Not Restore Format Flash This menu item is used to return most of the control panel settings back to their factory settings. When you choose to restore the factory default settings: • All downloaded resources (fonts, macros, symbol sets) in printer memory (RAM) are deleted. (Resources residing in flash memory or on hard disk are unaffected.) • All menu settings are returned to the factory default values except: - Display Language - Job Buffer Size - All settings in the Parallel Menu, Serial Menu, Fax Menu, Network Menu, USB Menu, Infrared Menu, and LocalTalk Menu. Note: An asterisk (*) appears next to the factory default value for each of the menu items listed in this chapter. Yes No Defragment Flash Formatting flash memory deletes all resources (fonts, macros) stored in flash memory and prepares flash memory to receive new resources. You may want to select Print Directory before you format the flash memory to determine what resources, if any, are stored in flash. The Format Flash menu item is not displayed if the flash memory is Read/Write or Write protected. Warning: If you select Format Flash and then press Go, any data stored in flash memory is lost. Do not turn the printer off while the flash is formatting. Yes No Defragmentation offers a method where the user can reclaim the space occupied by a deleted resource without reformatting the entire flash memory device. During defragmentation the printer firmware copies all undeleted resources to printer memory, and then reformats the flash. Once the format operation is complete, the firmware loads all the undeleted resources back on the flash memory. The defragment flash menu item is not displayed if the installed option is defective or is Read/ Write or Write protected. Chapter 3: Menus 33