Lexmark Optra C710 User's Guide - Page 166

Attendance messages (continued) Message Print Jobs on Disk? Delete All Jobs. Go/Stop? Files Will be Lost. Go/Stop? Invalid Font Data Invalid Network x Code 30 Color Toner Missing 35 Res Save Off Deficient Memory 37 Insufficient Collation Area Action Jobs that were spooled to the optional hard disk before the printer was last turned off have not yet printed. Press Go to print the jobs. Press Return or Stop to delete the jobs from the disk without printing them. This message is displayed when you have selected all CONFIDENTIAL JOBS or HELD JOBS for deletion. This message warns the user this operation results in the deletion of all confidential or held print jobs. You must take one of the following actions: • Press Return or Stop to cancel the delete operation. • Press Go to validate the option and delete all confidential or held jobs. You have changed the Job Buffer Size setting from the operator panel, and the printer must reformat the hard disk to activate the change. If you press Go, all files currently stored on the disk will be deleted. Press Return or Stop to cancel this operation. The printer has detected an incompatibility between the font data and the firmware. You must download compatible font data to flash memory before the printer can return to the ready state. The code in the specified network adapter has not been programmed or is invalid. You must download valid code to the network adapter before the printer can return to the ready state. The specified cartridge (Cyan, Magenta, Yellow, or Black) is not installed in the printer. Insert the cartridge and close the cartridge cover to clear the message. The printer lacks the memory needed to enable the Resource Save function. This message usually indicates that too much memory is allocated for one or more of the printer link buffers. To disable Resource Save and continue printing, press Go. To enable Resource Save after you get this message: • Set the link buffer for each interface to Auto, then exit the menus to activate the link buffer changes. When the Ready message is displayed, enable Resource Save from the Setup Menu. • Or, install additional printer memory. See page 90 for more information. The printer memory (or optional hard disk, if installed) does not have the space necessary to collate the print job. • Press Go to print the portion of the job already stored and begin collating the rest of the job. • Cancel the print job. Press Menu> or or