Oki ML591 MICROLINE Reference Manual - Page 144
-14.pdf, Check Digits for Code 128 Code Sets 9-Pin Printers
View all Oki ML591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Each set has a different check digit. Table 75: IBM/Epson Print Code 128 Command - Check Digits for Code 128 Code Sets (9-Pin Printers) Code Set A B C Check Digit ASCII Dec Hex g 103 67 CAN 24 18 @ 64 40 Interleaved 2 of 5 Bar Code Commands Interleaved 2 of 5 bar coding is used mainly in the distribution industry. Two digits are encoded: one in the bars and one in the spaces. Ten characters are encoded, each any ASCII character from 0 to 9 (48 to 57 Dec, 30 to 39 Hex). The sum of the black bars and spaces becomes the maximum width of two characters. Select Interleaved 2 of 5 Bar Code Command The command for selecting Interleaved 2 of 5 is ESC DLE A m 3 0 n3 n4 n5 n6 n7 n8 Interleaved 2 of 5 Parameters n3 and n4 These parameters set the vertical length of the bars in 6/72", as calculated by the equation (n3 x 10) + n4] x 6/72" where the total value must be less than or equal to 25. Interleaved 2 of 5 Parameter n5 Parameter n5 is used in combination with parameter n7 to set the width of one character of the black bars, as follows: Table 76: IBM/Epson Select Interleaved 2 of 5 Command - Black Bar Width for Parameter n5, n7 Values (9-Pin Printers) n7 = 1 n7 = 2 n7 = 3 n7 = 4 n7 = 5 n7 = 6 n7 = 7 n5 = 1 11/144" 13/144" 15/144" 17/144" 21/144" 23/144" 25/144" n5 = 2 18/144" 20/144" 24/144" 28/144" 32/144" 34/144" 38/144" n5 = 3 25/144" 29/144" 33/144" 37/144" 43/144" 47/144" 51/144" n5 = 4 32/144" 36/144" 42/144" 48/144" 54/144" 58/144" 64/144" n5 = 5 39/144" 45/144" 51/144" 57/144" 65/144" 71/144" 77/144" n5 = 6 46/144" 52/144" 60/144" 68/144" 76/144" 82/144" 90/144" n5 = 7 53/144" 61/144" 69/144" 77/144" 87/144" 95/144" 103/144" 106 Chapter 10: Bar Code Commands for 9-Pin Printers