Ricoh Aficio MP C3500 Troubleshooting - Page 104
Start, Start Printing, under Printer Function.
View all Ricoh Aficio MP C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Adding paper, Toner and Staples Note ❒ When performing the auto color calibration from the copy function, press [Start] under Copier Function. When performing from the printer function, press [Start] under Printer Function. ❒ The test pattern will not be read if it is set in the ADF. ❒ When performing the auto color calibration from the printer function, select test patterns from [600 × 600 dpi], [1800 × 600 dpi] and [2400 × 600 dpi] and then press [Start Printing]. ❒ The test pattern will be printed on an A4K, 81/2"× 11"K size page (If A4K is not available then A3 L, B4 JISL will be used.). Make sure to check the paper set in the paper tray. ❒ Set the test pattern in the following way: 6 GCCLCPIE ❒ When the ADF is installed, make sure to set the test pattern on the exposure glass, and then 2 or 3 white sheets, same size as the test pattern, above the test pattern. 96