Samsung SPH-D600 User Manual (user Manual) (ver.f7) (English) - Page 169

Web and Data To turn Wi-Fi off: 1. Press > > > Wireless & networks > Wi-Fi settings > Wi-Fi. 2. Tap to remove the green checkmark and deactivate Wi-Fi. Note: Use of wireless data connections such as Wi-Fi and Bluetooth can cause an added drain to your battery and reduce your use times. To connect to a Wi-Fi network: 1. Press > > > Wireless & networks > Wi-Fi settings. Ⅲ The network names and security settings (Open network or Secured with xxx) of detected Wi-Fi networks are displayed in the Wi-Fi networks section. Note: When you select an open network, you will be automatically connected to the network. 2. To manually add your new network connection: Ⅲ Touch Add Wi-Fi network. Ⅲ Enter the Network SSID. This is the name of your Wi-Fi network. Ⅲ Tap the Security field and select a security option. This must match the current security setting on your target network. Ⅲ If secured, you will also need to enter the wireless password. The show password option, reveals the password as you type it instead of showing only asterisks (****). Ⅲ Tap Save to store the new information and connect to the Wi-Fi network. Note: The next time your device connects to a previously accessed or secured wireless network, you are not prompted to enter the wireless password again, unless you reset your device back to its factory default settings. To manually scan for a Wi-Fi network: 1. Press > > > Wireless & networks > Wi-Fi settings. 2. Press and tap Scan. 3B. Web and Data Services 155