D-Link DXS-5000-54S Emulator - Page 1045

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Parameters route-map map-name (Optional) A route map may be configured to set attributes on the default route advertised to the neighbor. Default The default is not configured to originate a BGP default route. Command Mode BGP Router Config 11-25 neighbor default-originate (IPv6 Address Family Config) To configure BGP to originate a default IPv6 route to a specific neighbor, use the neighbor defaultoriginate command in IPv6 Address Family configuration mode. By default, a neighbor-specific default has no MED and the Origin is IGP. Attributes may be set using an optional route map. A neighbor-specific default is only advertised if the Adj-RIB-Out does not include a default learned by other means, either from the "default-information originate" command or a default learned from a peer. This type of default origination is not conditioned on the presence of a default route in the routing table. This form of default origination does not install a default route in the BGP routing table (it will not appear in the "show ip bgp" command), nor does it install a default route in the Adj-RIB-Out for the update group of peers so configured (it will not appear in the "show ip bgp neighbors advertised-routes" command). Origination of the default route is not subject to a prefix filter configured with the command "distribute-list prefix out". A route map may be configured to set attributes on the default route sent to the neighbor. lf the route map includes a match ip-address term, that term is ignored. If the route map includes match community or match as-path terms, the default route is not advertised. If there is no route map with the route map name given, the default route is not advertised. Issue this command in Peer Template Configuration Mode to add it to a peer template. Use the no command to prevent BGP from originating a default IPv6 route to a specific neighbor. default-originate [route-map map-name] no default-originate [route-map map-name] Parameters route-map map-name (Optional) A route map may be configured to set attributes on the default route advertised to the neighbor. Default The default is not configured to originate a default. Command Mode IPv6 Address Family Config 1039