D-Link DXS-5000-54S Emulator - Page 849

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Routes with 3 Next Hops 1 Routes with 4 Next Hops 10 Number of Prefixes: /64: 17 Display Parameters Connected Routes Static Routes 6To4 BGP Routes External Internal Local OSPF Routes Intra Area Route Inter Area Routes External Type-1 Routes External Type-2 Routes Reject Routes Net Prototype Routes Number of Prefixes Total Routes Best Routes Alternate Routes Route Adds Route Deletes Unresolved Route Adds Invalid Route Adds Failed Route Adds Hardware Failed Route Adds Total number of connected routes in the routing table. Total number of static routes in the routing table. Total number of 6to4 routes in the routing table. Total number of routes installed by the BGP protocol. The number of external BGP routes. The number of internal BGP routes. The number of local BGP routes. Total number of routes installed by OSPFv3 protocol. The type of route to a destination, intra-area route. The type of route to a destination, inter-area route. The total number of external type-1 routes installed by OSPF protocol. The total number of external type-2 routes installed by OSPF protocol. Total number of reject routes installed by all protocols. The total number of net-prototype routes. Summarizes the number of routes with prefixes of different lengths. The total number of routes in the routing table. The number of best routes currently in the routing table. This number only counts the best route to each destination. The number of alternate routes currently in the routing table. An alternate route is a route that was not selected as the best route to its destination. The number of routes that have been added to the routing table. The number of routes that have been deleted from the routing table. The number of route adds that failed because none of the route's next hops were on a local subnet. Note that static routes can fail to be added to the routing table at startup because the routing interfaces are not yet up. This counter gets incremented in this case. The static routes are added to the routing table when the routing interfaces come up. The number of routes that failed to be added to the routing table because the route was invalid. A log message is written for each of these failures. The number of routes that failed to be added to the routing table because of a resource limitation in the routing table. The number of routes that failed to be inserted into the hardware due to a hash error or a table full condition. 843