D-Link DXS-5000-54S Emulator - Page 1178

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide used for the conform colors. Default The default is None. Command Mode Policy-Class-Map Config 12-46 class This command creates an instance of a class definition within the specified policy for the purpose of defining treatment of the traffic class through subsequent policy attribute statements. The classname is the name of an existing DiffServ class. Note: This command causes the specified policy to create a reference to the class definition. Note: The CLI mode is changed to Policy-Class-Map Config when this command is successfully executed. Use the no command to delete the instance of a particular class and its defined treatment from the specified policy. classname is the names of an existing DiffServ class. Note: This command removes the reference to the class definition for the specified policy. class classname no class classname Parameters classname Default The default is None. Command Mode Policy-Map Config The name of an existing DiffServ class. The command causes the specified policy to create a reference to the class definition. 12-47 mark cos This command marks all packets for the associated traffic stream with the specified class of service (CoS) value in the priority field of the 802.1p header (the only tag in a single tagged packet or the first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not already contain this header, one is inserted. The CoS value is an integer from 0 to 7 mark cos 0-7 1172