D-Link DXS-5000-54S Emulator - Page 143

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Note: All of the commands described in this section are included in one of five functional groups: • Show commands are used to display statistics, switch settings, and other information. • Configuration commands are used to configure the options and features of the switch. There is a show command that corresponds to every configuration command and displays the configuration setting. • Copy commands are used to transfer or save informational and configuration files to and from the switch. • Debug commands are used to help troubleshoot network issues and provide diagnostic information. • Clear commands are used to clear some or all of the settings and return them to the factory defaults. 5-1 erase application This command is used to remove the file specified from the directory of switch file system applications. erase application Parameters None Default The default is Disable. Command Mode Privileged EXEC Application Commands This command is used to make the application began by the designed executable file ready and available to be configured and executed. The way in which the application is run on the switch is determined by the parameters of this command. An already installed application file name can be used to update the parameters when issuing this command . Doing so will update the configuration for when the application is started the next time. It should be noted that this command can also be issued for a file that is not currently on the switch. Doing so allows the execution parameters to be preconfigured, with the configuration not taking effect until the executable file is actually included in the switch file system. The no command is used to remove a given configuration of an application for execution on the switch. If the application in question is running when the no command is issued, all of the processes associated with the application will be stopped automatically. 5-2 application start This command is used to initiate the execution of the application specified. Before an application can be started using this command, however, it must be installed. application start filename 137