D-Link DXS-5000-54S Emulator - Page 684

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide le le-value description text renumber renumber-interval first-statement-number (Optional) If this option is configured, specifies a prefix length less than or equal to the ipv6-prefix/prefix-length. lt is the highest value of a range of the length. Description of the prefix list. lt can be up to 80 characters in length. Provides the option to renumber the sequence numbers of the IPv6 prefix list statements with a given interval starting from a particular sequence number. Default No prefix lists are configured. When neither the ge nor the le option is configured, the destination prefix must match the network/length exactly. If the ge option is configured without the le option, any prefix with a network mask greater than or equal to the ge value is considered a match. Similarly, if the le option is configured without the ge option, a prefix with a network mask less than or equal to the le value is considered a match. Command Mode Global Config Example The following example configures a prefix list that allows routes with one of two specific destination prefixes, 2001::/64 and 5F00::/48. (R1)(Config)#ipv6 prefix-list apple seq 10 permit 2001: :/64 (R1)(Config)#ipv6 prefix-list apple seq 20 permit 5F00: :/48 7-54 route-map To create a route map and enter Route Map Configuration mode, use the route-map command in Global Configuration mode. One use of a route map is to limit the redistribution of routes to a specified range of route prefixes. The redistribution command specifies a route map which refers to a prefix list. The prefix list identifies the prefixes that may be redistributed. D-LINK OS accepts up to 64 route maps. No command deletes a route map or one of its statements. route-map map-tag [permit | deny] [sequence-number] no route-map map-tag [permit | deny] [sequence-number] Parameters map-tag permit deny Text name of the route map. Route maps with the same name are grouped together in order of their sequence numbers. A route map name may be up to 32 characters long. (Optional) Permit routes that match all of the match conditions in the route map. (Optional) Deny routes that match all of the match conditions in the route map. 678