D-Link DXS-5000-54S Emulator - Page 776

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Stub Router Duration External LSDB Overflow External LSA Count External LSA Checksum AS_OPAQUE LSA Count AS_OPAQUE LSA Checksum New LSAs Originated LSAs Received LSA Count Maximum Number of LSAs LSA High Water Mark AS Scope LSA Flood List Length Retransmit List Entries Maximum Number of Retransmit Entries Retransmit Entries High Water Mark NSF Helper Support NSF help Strict LSA checking Time elapsed since the router last entered the stub router mode. The row is only listed if stub router is active and the router entered stub mode because of a resource limitation. The duration is displayed in DD:HH:MM:SS format. When the number of nondefault external LSAs exceeds the configured limit, External LSDB Limit, OSPF goes into LSDB overflow state. In this state, OSPF withdraws all of its self-originated nondefault external LSAs. After the Exit Overflow Interval, OSPF leaves the overflow state, if the number of external LSAs has been reduced. Number of external (LS type 5) link-state advertisements in the link-state database. Sum of the LS checksums of external link-state advertisements contained in the link-state database. Shows the number of AS Opaque LSAs in the link-state database. Shows the sum of the LS Checksums of AS Opaque LSAs contained in the link-state database. Number of new link-state advertisements that have been originated. Number of link-state advertisements received determined to be new instantiations. Total number of link state advertisements currently in the link state database. Maximum number of LSAs that OSPF can store. Maximum size of the link state database since the system started. Number of LSAs currently in the global flood queue waiting to be flooded through the OSPF domain. LSAs with AS flooding scope, such as type 5 external LSAs and type 11 Opaque LSAs. Total number of LSAs waiting to be acknowledged by all neighbors. An LSA may be pending acknowledgment from more than one neighbor. Maximum number of LSAs that can be waiting for acknowledgment at any given time. Maximum number of LSAs on all neighbors' retransmit lists at any given time. Indicates whether helpful neighbor functionality has been enabled for OSPF for planned restarts, unplanned restarts, or both (Always). Indicates whether strict LSA checking has been enabled. If enabled, then an OSPF helpful neighbor will exit helper mode whenever a topology change occurs. If disabled, an OSPF neighbor will continue as a helpful neighbor in spite of topology changes. 7-184 show ip ospf abr Display the internal OSPF routing table entries to Area Border Routers (ABR) for the specified virtual router. If no router is specified, it displays information for the default router. 770