D-Link DXS-5000-54S Emulator - Page 847

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Parameters None Default The default is None. Command Mode Privileged EXEC Example The following provides an example of the command. (1b6m)#show route preferences Local 0 Static 1 OSPF Intra 110 OSPF Inter 110 OSPF External 110 BGP External 20 BGP Internal 200 BGP Local 200 Display Parameters Local Static OSPF lntra OSPF Inter OSPF External BGP External BGP Internal BGP Local Preference of directly-connected routes. Preference of static routes. Preference of routes within the OSPF area. Preference of routes to other OSPF routes that are outside of the area. Preference of OSPF external routes. Preferepce of BGP external routes. Preference of routes to other BGP routes that are outside of the area. Preference of routes within the BGP area. 8-49 show ipv6 route summary Shows a summary of the routing table's current status. If the optional all keyword is used, then some statistics, such as the number of routes from each source, will also include counts for alternate routes. An alternate route consists of a route that is not the most preferred route to its own destination, such that it is not installed in the forwarding table. To be shown only the number of best routes, omit the optional keyword. show ipv6 route summary [all] 841