D-Link DXS-5000-54S Emulator - Page 902

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Dead Time Restart Helper Status Restart Reason Remaining Grace Time Restart Helper Exit Reason • Attempt - no recent information has been received from the neighbor but a more concerted effort should be made to contact the neighbor. • lnit - an Hello packet has recently been seen from the neighbor, but bidirectional communication has not yet been established. • 2 way - communication between the two routers is bidirectional. • Exchange start - the first step in creating an adjacency between the two neighboring routers, the goal is to decide which router is the master and to decide upon the initial Database Description (DD) sequence number. • Exchange - the router is describing its entire link state database by sending DD packets to the neighbor. • Full - the neighboring routers are fully adjacent and they will now appear in router-LSAs and network-LSAs. The amount of time, in seconds, to wait before the router assumes the neighbor is unreachable. Indicates the status of this router as a helper during a graceful restart of the router specified in the command line: • Helping - This router is acting as a helpful neighbor to the specified router. • Not Helping - This router is not a helpful neighbor at this time. When this router is in helpful neighbor mode, this indicates the reason for the restart as provided by the restarting router. The number of seconds remaining in current graceful restart interval. This is displayed only when this router is currently acting as a helpful neighbor for the router specified in the command. Indicates the reason that the specified router last exited a graceful restart. • None - Graceful restart has not been attempted • in Progress - Restart is in progress • Completed - The previous graceful restart completed successfully • Timed Out - The previous graceful restart timed out • Topology Changed - The previous graceful restart terminated prematurely because of a topology change. If you specify an IP address for the neighbor router, the following fields display: Interface The interface of the local router. Area ID The area ID associated with the interface. Options An integer value that indicates the optional OSPF capabilities supported by the neighbor. These are listed in its Hello packets. This enables received Hello Packets to be rejected (i.e., neighbor relationships will not even start to form) if there is a mismatch in certain crucial OSPF capabilities. Router Priority The router priority for the specified interface. Dead Timer Due The amount of time, in seconds, to wait before the router assumes the 896