D-Link DXS-5000-54S Emulator - Page 61

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Note: The admin user cannot be deleted. Only one user with read/write privileges is allowed. However, up to five read-only users can be configured on the system. 4-53 aaa accounting This command is used in the Global Config mode in order to create an accounting method list for user EXEC sessions, user executed commands, or DOT1X. This list is identified either by default or by a userspecified Iist_name. When enabled for a line-mode, accounting records can be sent either at both the beginning and the end (i.e., start-stop) or only at the end (i.e., stop-only). If the user specifies none, then accounting is disabled for the indicated list. If the user specifies TACACS+ as the accounting method, then accounting records are sent to a TACACS+ server. If the user specifies radius as the accounting method, then accounting records are sent to a RADIUS server. The no command is used to delete the accounting method list. Note: The following stipulations all apply: • For each exec and commands type, the maximum number of Accounting Method lists that can be created is five. • For DOT1X, it is only possible to create the default Accounting Method list. No other lists can be created. • It is possible to use the same list-name for both the exec and commands accounting types. • The use of AAA Accounting for commands with RADIUS as the accounting method is not possible. • For DOT1X accounting, the only supported record type is either Start-stop or None, where the use of Start-stop enables accounting and the use of None disables accounting. • The only accounting method type supported for DOT1X accounting is RADIUS. aaa accounting {exec | commands | dot1x} {default | list_name} {start-stop | stop-only | none} method1 [method2...] no aaa accounting {exec | commands | dot1x} {default | list_name} Parameters exec commands dot1x default list_name start-stop stop-only none method Default The default is None. Indicates that accounting is provided for user EXEC terminal sessions. Indicates that accounting is provided for all user executed commands. Indicates that accounting is provided for DOT1X user commands. Indicates that the default list of methods is used for accounting services. Indicates the string of characters used to name the list of accounting methods. Indicates that a start accounting notice is sent at the beginning of a process and that a stop accounting notice is sent at the end of the process. Indicates that a stop accounting notice is sent at the end of the requested user process. Indicates that accounting services are disabled on this line. Indicates that either the TACACS+ or the RADIUS server is used for accounting purposes. 55