D-Link DXS-5000-54S Emulator - Page 1116

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide In this example, BGP has received an UPDATE message from an external peer 172.20.101.100 with something otherthan the peer's ASN as the first ASN in the AS-PATH. The additional counter shows that this occurred one time. (Routing)#show ip bgp neighbors 172.20.101.100 Remote Address 172.20.101.100 Remote AS 101 Last Error UPDATE Message Error Last SubError Malformed AS_PATH Unexpected first ASN in AS path 1 Established Transitions 1 Established Time 0 days 00 hrs 00 mins 10 secs Display Parameters Description Remote Address Remote AS BFD Enabled to Detect Fast Failover Peer ID Peer Admin Status Peer Type Listen Range Listen Range Local Interface Address Local Port Remote Port Connection Retry Interval Neighbor Capabilities Text string assigned using the command "neighbor description". This text string only appears if a description is configured. The neighbor's IP address. The neighbor's autonomous system number. Specifies if BFD has been enabled for BGP neighbors. The neighbors BGP router ID. START or STOP. If a neighbor was created with the BGP dynamic neighbors feature, Dynamic is shown. If the neighbor was created with the BGP dynamic neighbors feature, the field shows the listen range to which the neighbor belongs. The listen range. The IPv4 address used as the source IP address in packets sent to this neighbor. TCP port number on the local end of the connection. TCP port number on the remote end of the connection. How long BGP waits between connection retries. Optional capabilities reported by the neighbor, recognized and accepted by this router. Codes listed in the show output are as follows: • MP: Multiprotocol • RF: Route Refresh • AS4: 4-Byte ASN This version of D-LINK OS does not support any multiprotocol AFI/SAFI pairs other than IPv4 unicast. The presence of this capability does not imply otherwise. 1110