D-Link DXS-5000-54S Emulator - Page 721

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Default The default is 10. Command Mode Interface Config 7-103 ip vrrp track ip route Track the route reachability on an interface or range of interfaces. When the tracked route is deleted, the priority of the VRRP router will be decremented by the value specified in the priority argument. When the tracked route is added, the priority will be incremented by the same. A VRRP configured interface can track more than one route. When a tracked route goes down, then the priority of the router will be decreased by 10 (the default priority decrement) for each downed route. By default no routes are tracked. If you specify just the route to be tracked, without giving the optional priority, then the default priority will be set. The default priority decrement is 10. The default priority decrement is changed using the priority argument. No command removes the route from the tracked list or to restore the priority decrement to its default. When removing a tracked IP route from the tracked list, the priority should be incremented by the decrement value if the route is not reachable. ip vrrp vrid track ip route ip-address/prefix-length [decrement priority] no ip vrrp vrid track ip route ip-address/prefix-length [decrement] Parameters vrid ip-address/prefix-length decrement priority Default The default is 10. Command Mode Interface Config Indicates the virtual router ID. Prefix and prefix length of the route to be tracked. (Optional) Enter amount to decrement router priority (1-254). 7-104 show ip vrrp interface stats Display the statistical information about each virtual router configured on the switch. show ip vrrp interface stats {slot/port | vlan vlan-id} vrid 715