D-Link DXS-5000-54S Emulator - Page 870

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Default The default is None. Command Mode Router OSPFv3 Config 8-81 distance ospf (OSPFv3) Sets the route preference value for the OSPF route types in the router. When determining the best route, lower route preference values are preferred. The OSPF route type can be intra, inter, or external. The external type routes are all given the same preference value. The allowed range of the preference value is 1 to 255. The no command sets the default route preference value for the OSPF routes in the router. The OSPF route type can be intra, inter, or external. The external type routes are all given the same preference value. distance ospf {intra-area 1-255 | inter-area 1-255 | external 1-255} no distance ospf {intra-area | inter-area | external} Parameters intra-area inter-area external Default The default is 110. Command Mode Router OSPFv3 Config Indicates the distance for all routes within an area (1-255). Indicates the distance for all routes from one area to another area (1255). Indicates the distance for routes learned by redistribution from other routing domains (1-255). 8-82 enable (OSPFV3) Resets the default administrative mode of the OSPF in the router to active. The no command sets the administrative mode of the OSPF in the router to inactive. enable no enable 864