D-Link DXS-5000-54S Emulator - Page 1148

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide 11-142 ip community-list To create or configure a BGP community list, use the ip community-list command in Global Configuration mode. Acommunity list statement with no community values is considered a match for all routes, regardless of their community membership. So the statement ip community-list bullseye permit is a permit all statement. A community number may be entered in either format, as a 32-bit integer or a pair of 16-bit integers separated by a colon, regardless of whether the "ip bgp-community new-format" command is active. Up to 16 communities, including the well-known communities, can be listed in a single command. Up to 32 statements may be configured with a given community list name. Up to 128 unique community list names may be configured. Use the no command to delete a community list. ip community-list standard list-name {permit | deny} [community-number] [no-advertise] [noexport] [no-export subconfed] [no-export] no ip community-list standard list-name Parameters standard list-name permit deny community no-advertise no-export no-export-subconfed no-export ldentifies a named standard community list. The name may contain up to 32 characters. Indicates that matching routes are permitted. Indicates that matching routes are denied. (Optional) From 0 to 16 community numbers formatted as a 32-bit integers or in AA:NN format, whereAA is a 2-byte autonomous system number and NN is a 16 bit integer. The range is 1 to 4,294,967,295 (any 32-bit integer other than 0). Communities are separated by spaces. (Optional) The well-known standard community, NO_ADVERTlSE (0xFFFFFF02). (Optional) The well-known standard community, NO_EXPORT, (0XFFFFFF01). (Optional) Deny only routes that are not exported to other external peers. (Optional) Deny only routes that are not exported to other peers. Default The default is Community lists are not configured. Command Mode Global Config 11-143 show ip as-path-access-list This command displays the contents of AS-PATH access lists. 1142