D-Link DXS-5000-54S Emulator - Page 21

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Command Mode Policy-Class-Map Config Class-Map Config Router OSPF Config BGP Router Config Route Map Config IPv6 Address Family Config Peer Template Config Peer Template Address Family Config MAC Access-list Config IPv6 Access-list Config Management Access-list Config TACACS+ Config ARP Access-List Config User-Group Configuration Mode Task-Group Configuration Mode Access Method Enter class while in the Policy Map mode. Note: A given classname should be created using the class-map command. Enter class-map match-all while in the Global Config mode, and then use either the optional keyword ipv4 or ipv6 to specify the Layer 3 protocol for this class. Enter router ospf while in the Global Config mode. Enter router bgp asnumber while in the Global Config mode. Enter route-map map-tag while in the Global Config mode. Enter address-family ipv6 while in the BGP Router Config mode,. Enter template peer name while in the BGP Router Config mode to create a BGP peer template and to enter the Peer Template Configuration mode. Enter address-family {ipv4 | ipv6) while in the Peer Template Config mode. Enter mac access-list extended name while in the Global Config mode. Enter ipv6 access-list name while in the Global Config mode. Enter management access-list name while in the Global Config mode. Enter tacacs-server host ip-addr, where ip-addr is the IP address of the TACACS+ server on your network, while in the Global Config mode. Enter the arp access-list command while in the Global Config mode. Enter the usergroup command while in the Global Config mode. Enter the taskgroup command while in the Global Config mode. Command Completion and Abbreviation When the user types enough letters of a command to uniquely identify the command keyword, the command completion feature finishes spelling the command for the user. Once the user has entered enough letters, simply pressing the SPACEBAR or TAB key will complete the word. Command abbreviation lets the user execute a command when the user has entered enough letters to uniquely identify the command. The user must, however, enter all of the required parameters and keywords before entering the command. 15