D-Link DXS-5000-54S Emulator - Page 779

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Import Summary LSAs Redistribute into NSSA Default Information Originate Default Metric Default Metric Type Translator Role Translator Stability Interval Translator State Shows whether to import summary LSAs into the NSSA. Shows whether to redistribute information into the NSSA. Shows whether to advertise a default route into the NSSA. Metric value for the default route advertised into the NSSA. Metric type for the default route advertised into the NSSA. NSSA translator role of the ABR, which is always or candidate. Amount of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router. Shows whether the ABR translator state is disabled, always, or elected. 7-186 show ip ospf asbr Display the internal OSPF routing table entries to Autonomous System Boundary Routers (ASBR) for the specified virtual router. If no router is specified, it displays information for the default router. show ip ospf asbr [vrf vrf-name] Parameters vrf vrf-name Default The default is None. Command Mode • Privileged EXEC • User EXEC Display Parameters Type Router ID Cost Area ID Next Hop Next Hop lntf (Optional) Display the OSPF Autonomous System Boundary Routers information of a virtual router. Type of the route to the destination: • intra - intra-area route • inter - Inter-area route Router ID of the destination. Cost of using this route. Area ID of the area from which this route is learned. Next hop toward the destination. Outgoing router interface to use when forwarding traffic to the next hop. 773