D-Link DXS-5000-54S Emulator - Page 1117

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide IPv4 Unicast Support Indicates whether IPv4 unicast routes can be exchanged with this peer. Both indicates that IPv4 is active locally and the neighbor indicated support for IPv4 unicast in its OPEN message. Sent indicates that IPv4 unicast is active locally, but the neighbor did not include this AFI/SAFI pair in its OPEN message. IPv4 unicast is always enabled locally and cannot be disabled. IPv6 Unicast Support Indicates whether IPv6 unicast routes can be exchanged with this peer. Both and Sent have the same meaning as for IPv4. None indicates that neither the local router northe peer has IPv6 enabled for this adjacency. Received indicates that the peer advertised the IPv6 unicast capability, but it is not enabled locally. IPv6 unicast is enabled locally using the neighbor activate command in address-family IPv6 configuration mode. Update Source The configured value for the source IP address of packets sent to this peer. This field is only included in the output if the update source is configured. Configured Hold Time The time, in seconds, that this router proposes to this neighbor as the hold time. Configured Keep Alive Time The configured KEEPALIVE interval for this neighbor. Negotiated Hold Time The minimum of the configured hold time and the hold time in the OPEN message received from this neighbor. If the local router does not receive a KEEPALIVE or UPDATE message from this neighbor within this interval of time, the local router drops the adjacency. This field is only shown if the adjacency state is OPEN CONFIRM or greater. MD5 Password The TCP MD5 password, if one is configured, in plain text. Keep Alive Time The number of seconds between KEEPALIVE messages sent to this neighbor. This field is only shown if the adjacency state is OPEN CONFIRM or greater. Last Error (Sent) The last error that occurred on the connection to this neighbor. Last SubError The suberror reported with the last error. Established Tranitions The number of times the adjacency has transitioned into the Established state. Established Time How long since the connection last transitioned to or from the Established state. Time Since Last Update How long since an UPDATE message has been received from this neighbor. Message Table The number of BGP messages sent to and received from this neighbor. Received UPDATE Queue Size Received UPDATE messages are queued for processing. This section shows the current length of the neighbors UPDATE queue in bytes, the high water mark, the limit, and the number of UPDATEs that have been dropped because the queue reached the limit. The following fields are displayed for IPv4, and if IPv6 is running, for IPv6 as well. Prefixes Advertised A running count of the number of prefixes advertised to or received from this neighbor. Prefixes Withdrawn A running count of the number of prefixes included in the Withdrawn Routes portion of UPDATE messages, to and from this neighbor. 1111