D-Link DXS-5000-54S Emulator - Page 336

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Command Mode • Privileged EXEC • User EXEC Example The following is a command example. (Routing)# show spanning-tree brief Bridge Priority 32768 Bridge Identifier 80:00:00:05:64:2F:0D:E5 Bridge Max Age 20 Bridge Max Hops 20 Bridge Hello Time 2 Bridge Forward Delay 15 Bridge Hold Time 6 Display Parameters Bridge Priority Bridge Identifier Bridge Max Age Bridge Max Hops Bridge Hello Time Bridge Forward Delay Bridge Hold Time Displays the specified bridge priority for both Common and Internal Spanning Tree (CST). Displayed in multiples of 4096, the value range is from 0 to 61440. It is displayed in multiples of 4096. Bridge identifier for the selected MST instance, composed of the bridge priority and the base MAC address of the bridge. Displays the specified bridge max age for CST. The value is defined in seconds ranging from 6 to 40, less than or equal to 2 x (Bridge Forward Delay -1). Bridge max-hops count for the device. Displays the bridge hello timer value between each bridge protocol data unit through a port. The value is defined as 2 seconds by default with a range between 1 and 10 seconds forward delay. Displays the specified bridge forward delay parameter for CST. The value is defined in seconds ranging from 4 to 30. Minimum time between transmission of Configuration Bridge Protocol Data Units (BPDUs). 5-240 show spanning-tree interface Display the settings and parameters for a specific switch port within the common and internal spanning tree. The {slot/port | lag lag-id} is the displayed switch port or LAG. The following details are displayed: show spanning-tree interface {slot/port | lag lag-id} 330