D-Link DXS-5000-54S Emulator - Page 745

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Parameters areaid neighbor Indicates an area ID. Enter the router ID of the virtual neighbor. Default The default is None. Command Mode Router OSPF Config 7-133 area virtual-link authentication Configure the authentication type and key for the OSPF virtual interface identified by areaid and neighbor. The neighbor parameter is the Router ID of the neighbor. The value for type is either none, simple, or encrypt. The key is composed of standard displayable, non-control keystrokes from a Standard 101/102key keyboard. The authentication key must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the key may be up to 16 bytes. Unauthenticated interfaces do not need an authentication key. If the type is encrypted, a key ID in the range of 0 and 255 must be specified. The default value for authentication type is none. Neither the default password key nor the default key ID are configured. No command configures the default authentication type for the OSPF virtual interface identified by areaid and neighbor. The neighbor parameter is the Router ID of the neighbor. area areaid virtual-link neighbor authentication {none | {simple key} | {encrypt key keyid)} no area areaid virtual-link neighbor authentication Parameters areaid neighbor none simple key encrypt key keyid Default The default is None. Command Mode Router OSPF Config Indicates an area ID. Enter the router ID of the virtual neighbor. Configure authentication type none for an OSPF virtual link. Configure authentication type simple for an OSPF virtual link. Configure MD5 encryption for an OSPF virtual link. 7-134 area virtual-link dead-interval (OSPF) 739