D-Link DXS-5000-54S Emulator - Page 331

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide Topology Change Count 0 Topology Change in progress False Designated Root 80:00:00:05:64:2F:0F:81 Root Path Cost 0 Root Port Identifier 00:00 Bridge Max Age 20 Bridge Max Hops 20 Bridge Tx Hold Count 6 Bridge Forwarding Delay 15 Hello Time 2 Bridge Hold Time 6 CST Regional Root 80:00:00:05:64:2F:0F:81 Regional Root Path Cost 0 Associated FIDs 1 2 3 4 5 Associated VLANs 1 2 3 4 5 Display Parameters Bridge Priority Bridge Identifier Time Since Topology Change Topology Change Count Topology Change Designated Root Root Path Cost Root Port Identifier Root Port Max Age Root Port Bridge Forward Delay Hello Time Bridge Hold Time Bridge Max Hops Specifies the bridge priority for the Common and Internal Spanning tree (CST). Value range: 0 and 61440, displayed in multiples of 4096. The bridge identifier for the CST, based on bridge priority and the base MAC address. Time in seconds. Number of times changed. Boolean value of the Topology Change parameter. indicative of a topology change in progress on any port assigned to the common and internal spanning tree. Root bridge bridge identifier, comprised of bridge's priority and base MAC address. Root Path Cost parameter value for the common and internal spanning tree. Port identifier to access the Designated Root for the CST. Derived value. Derived value. CST configured parameter value. The Configuration Bridge Protocol Data Units (BPDUs) minimum time between transmission. Bridge max-hops count for the device. 325