Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 145

Verifying DCB Configuration Use the show commands in Table 8-2 to display DCB configurations. Table 8-2. Displaying DCB Configurations Command Output show dot1p-queue mapping (Figure 8-5) Displays the current 802.1p priority-queue mapping. show dcb [stack-unit unit-number] (Figure 8-6) Displays data center bridging status, number of PFC-enabled ports, and number of PFC-enabled queues. On the master switch in a stack, you can specify a stack-unit number. Valid values: 0 to 5. show qos dcb-input [pfc-profile] (Figure 8-7) Displays the PFC configuration in a DCB input policy. show qos dcb-output [ets-profile] (Figure 8-8) Displays the ETS configuration in a DCB output policy. show qos priority-groups (Figure 8-9) Displays the ETS priority groups configured on the switch, including the 802.1p priority classes and ID of each group. show interface port-type slot/port pfc {summary Displays the PFC configuration applied to ingress traffic on an interface, | detail} (Figure 8-10) including priorities and link delay. To clear PFC TLV counters, use the clear pfc counters interface port-type slot/port command. show interface port-type slot/port pfc statistics Displays counters for the PFC frames received and transmitted (by dot1p (Figure 8-11) priority class) on an interface. show interface port-type slot/port ets {summary Displays the ETS configuration applied to egress traffic on an interface, | detail} (Figure 8-12 and Figure 8-13) including priority groups with priorities and bandwidth allocation. To clear ETS TLV counters, enter the clear ets counters interface port-type slot/port command. Figure 8-5. show dot1p-queue mapping Command Example FTOS(conf)# show dot1p-queue-mapping Dot1p Priority: 0 1 2 3 4 5 6 7 Queue : 0 0 0 1 2 3 3 3 Figure 8-6. show dcb Command Example FTOS# show dcb stack-unit 0 port-set 0 DCB Status : Enabled PFC Port Count : 56 (current), 56 (configured) PFC Queue Count : 2 (current), 2 (configured) Figure 8-7. show qos dcb-input Command Example FTOS(conf)# show qos dcb-input dcb-input pfc-profile pfc link-delay 32 pfc priority 0-1 dcb-input pfc-profile1 no pfc mode on pfc priority 6-7 Data Center Bridging (DCB) | 143