Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 243

Figure 13-21. Multiple-Range Bulk Configuration with VLAN, and Port-channel FTOS(conf-ifrange-te-5/1-23-te-1/1-2)# interface range Vlan 2 - 100 , Port 1 - 25 FTOS(conf-if-range-te-5/1-23-te-1/1-2-vl-2-100-po-1-25)# no shutdown FTOS(conf-if-range)# Interface Range Macros You can define an interface-range macro to automatically select a range of interfaces for configuration. Before you can use the macro keyword in the interface-range macro command string, you must define the macro. To define an interface-range macro, enter the following command: Command Syntax FTOS (config)# define interface-range macro_name {vlan vlan_ID - vlan_ID} | {{tengigabitethernet | fortyGigE} slot/ interface - interface} [ , {vlan vlan_ID - vlan_ID} {{tengigabitethernet | fortyGigE} slot/interface - interface}] Command Mode Purpose CONFIGURATION Defines the interface-range macro and saves it in the running configuration file. Define the Interface Range Figure 13-22 shows how to define an interface-range macro named "test" to select Ten Gigabit Ethernet interfaces 5/1 through 5/4. Figure 13-22. Define an Interface Range Macro FTOS(conf)# define interface-range test tengigabitethernet 5/1 - 4 Choose an Interface-range Macro To use an interface-range macro in the interface range command, enter this command: Command Syntax interface range macro name Command Mode Purpose CONFIGURATION Selects the interfaces range to be configured using the values saved in a named interface-range macro. Figure 13-23 shows how to change to the interface-range configuration mode using the interface-range macro named "test". Figure 13-23. Change the Interface Range Configuration Interfaces | 241