Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 529

Table 30-3. MIB Objects for Copying Configuration Files Using SNMP MIB Object copyUserName copyUserPassword OID .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 Object Values Username for the server. Password for the server. Description Username for the FTP, TFTP, or SCP server. • If the copyUserName is specified so must copyUserPassword. Password for the FTP, TFTP, or SCP server. To copy a configuration file: Step 1 2 3 Task Command Syntax Command Mode Create an SNMP community string with read/ snmp-server community write privileges. community-name rw CONFIGURATION Copy the f10-copy-config.mib MIB from the Dell Force10 iSupport webpage to the server to which you are copying the configuration file. On the server, use the command snmpset as shown: snmpset -v snmp-version -c community-name -m mib_path/f10-copy-config.mib force10system-ip-address mib-object.index {i | a | s} object-value... • Every specified object must have an object value, which must be preceded by the keyword i. See Table 30-3 for valid values. • index must be unique to all previously executed snmpset commands. If an index value has been used previously, a message like the one in Message 2 appears. In this case, increment the index value and enter the command again. • Use as many MIB Objects in the command as required by the MIB Object descriptions in Table 30-3 to complete the command. See Table 30-4 for examples. Note: You can use the entire OID rather than the object name. Use the form: OID.index i object-value as shown in Figure 30-8. Message 2 snmpset Index Value Error Error in packet. Reason: notWritable (that object does not support modification) Failed object: FORCE10-COPY-CONFIG-MIB::copySrcFileType.101 Table 30-4 shows examples of using the command snmpset to copy a configuration. These examples assume that: • the server OS is Unix • you are using SNMP version 2c • the community name is public, and • the file f10-copy-config.mib is in the current directory or in the snmpset tool path. Simple Network Management Protocol (SNMP) | 527