Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 381

Redistribute Routes You can add routes from other routing instances or protocols to the OSPF process. With the redistribute command, you can include router information protocol (RIP), static, or directly connected routes in the OSPF process. To redistribute routes, use the following command in CONFIGURATION- ROUTER-OSPF mode. Command Syntax Command Mode Usage redistribute {bgp | connected | rip | ospf | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] CONFIG-ROUTER-OSPF-id Specify which routes will be redistributed into OSPF process. Configure the following required and optional parameters: • bgp, connected, ospf , or static: enter one of the keywords to redistribute those routes. • metric metric-value range: 0 to 4294967295. • metric-type metric-type: 1 for OSPF external route type 1 or 2 for OSPF external route type 2. • route-map map-name: enter a name of a configured route map. • tag tag-value range: 0 to 4294967295. To view the current OSPF configuration, use the show running-config ospf command in EXEC mode or the show config command in ROUTER OSPF mode. Figure 20-17. show config Command Example FTOS(conf-router_ospf)#show config ! router ospf 34 network 10.1.2.32 0.0.0.255 area 2.2.2.2 network 10.1.3.24 0.0.0.255 area 3.3.3.3 distribute-list dilling in FTOS(conf-router_ospf)# Open Shortest Path First (OSPFv2) | 379