Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 524

www.dell.com | support.dell.com To configure system contact and location information from the Dell Force10 system: Task Command Identify the system manager along with this person's contact information (e.g., E-mail address or phone number). You may use up to 55 characters. Default: None snmp-server contact text Identify the physical location of the system. For example, San Jose, 350 Holger Way, 1st floor lab, rack A1-1. You may use up to 55 characters. Default: None snmp-server location text To configure the system from the management station using SNMP: Command Mode CONFIGURATION CONFIGURATION Task Command Identify the system manager along with this person's contact information (e.g., E-mail address or phone number). You may use up to 55 characters. Default: None Identify the physical location of the system. For example, San Jose, 350 Holger Way, 1st floor lab, rack A1-1. You may use up to 55 characters. Default: None snmpset -v version -c community agent-ip sysContact.0 s "contact-info" snmpset -v version -c community agent-ip sysLocation.0 s "location-info" Command Mode CONFIGURATION CONFIGURATION Subscribe to Managed Object Value Updates using SNMP By default, the Dell Force10 system displays some unsolicited SNMP messages (traps) upon certain events and conditions. You can also configure the system to send the traps to a management station. Traps cannot be saved on the system. FTOS supports the following three sets of traps: • RFC 1157-defined traps: coldStart, warmStart, linkDown, linkUp, authenticationFailure, egpNeighbborLoss • Dell Force10 enterpriseSpecific environment traps: temperature • Dell Force10 enterpriseSpecific protocol traps: ecfm, entity, ets, fips, lacp, pfc, stp, xstp 522 | Simple Network Management Protocol (SNMP)