Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 384

www.dell.com | support.dell.com To configure the debugging options of an OSPFv2 process, use the following command in EXEC Privilege mode. Command Syntax debug ip ospf process-id [event | packet | spf | database-timers rate-limit] Command Mode Usage EXEC Privilege View debug messages. To view debug messages for a specific OSPF process ID, enter debug ip ospf process-id. If you do not enter a process ID, the command applies to the first OSPF process. To view debug messages for a specific operation, enter one of the optional keywords: • event: view OSPF event messages • packet: view OSPF packet information. • spf: view shortest path first (spf) information. • database-timers rate-limit: view the LSAs currently in the queue Sample Configurations for OSPFv2 The following configurations are examples for enabling OSPFv2. These are not comprehensive directions. They are intended to give you a some guidance with typical configurations. You can copy and paste from these examples to your CLI. Be sure you make the necessary changes to support your own IP addresses, interfaces, names, etc. Basic OSPFv2 Router Topology The following shows a sample basic OSPFv2 topology. 382 | Open Shortest Path First (OSPFv2)