Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 489

Define an AAA Method List to be Used for RADIUS To configure RADIUS to authenticate or authorize users on the system, you must create an AAA method list. Default method lists do not need to be explicitly applied to the line, so they are not mandatory. To create a method list, enter one of the following commands in CONFIGURATION mode: Command Syntax aaa authentication login method-list-name radius aaa authorization exec {method-list-name | default} radius tacacs+ Command Mode CONFIGURATION CONFIGURATION Purpose Enter a text string (up to 16 characters long) as the name of the method list you wish to use with the RADIUS authentication method. Create methodlist with RADIUS and TACACS+ as authorization methods. Typical order of methods: RADIUS, TACACS+, Local, None. If authorization is denied by RADIUS, the session ends (radius should not be the last method specified). Apply the Method List to Terminal Lines To enable RADIUS AAA login authentication for a method list, you must apply it to a terminal line. To configure a terminal line for RADIUS authentication and authorization, enter the following commands in CONFIGURATION mode: Command Syntax line {aux 0 | console 0 | vty number [end-number]} login authentication {method-list-name | default} authorization exec methodlist Command Mode CONFIGURATION Purpose Enter the LINE mode. LINE CONFIGURATION Enable AAA login authentication for the specified RADIUS method list. This procedure is mandatory if you are not using default lists. To use the methodlist. Specify a RADIUS Server Host When configuring a RADIUS server host, you can set different communication parameters, such as the UDP port, the key password, the number of retries, and the timeout. Security | 487