Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 497

Figure 28-8. Specifying an SSH version FTOS(conf)#ip ssh server version 2 FTOS(conf)#do show ip ssh SSH server : disabled. SSH server version : v2. Password Authentication : enabled. Hostbased Authentication : disabled. RSA Authentication : disabled. Vty Encryption Remote IP To disable SSH server functions, use the no ip ssh server enable command. Using SCP with SSH to Copy a Software Image To use SCP to copy a software image through an SSH connection from one switch to another, follow these steps: Step Task Command Syntax 1 On Chassis One, set the SSH port number (port 22 by default). 2 On Chassis One, enable SSH. 3 On Chassis Two, invoke SCP. ip ssh server port number ip ssh server enable copy scp: flash: 4 On Chassis Two, in response to prompts, enter the path to the desired file and enter the port number specified in Step 1. Command Mode CONFIGURATION CONFIGURATION CONFIGURATION EXEC Privilege Figure 28-9 shows the use of SCP and SSH to copy a software image from one switch running SSH Server on UDP port 99 to the local switch: Figure 28-9. Using SCP to copy from an SSH Server on another Switch FTOS#copy scp: flash: Address or name of remote host []: 10.10.10.1 Port number of the server [22]: 99 Source file name []: test.cfg User name to login remote host: admin Password to login remote host: Destination file name [test.cfg]: test1.cfg Other SSH-related commands include: • crypto key generate: Generate keys for the SSH server. • debug ip ssh: Enables collecting SSH debug information. • ip scp topdir: Identify a location for files used in secure copy transfer. Security | 495