Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module Configuration Guide - Page 51

Figure 3-8. Tracking Changes with Configuration Comments FTOS#show running-config Current Configuration ... Current Configuration ... ! Version E8-3-16-0 ! Last configuration change at Tue Mar 6 11:51:50 2012 by default ! Startup-config last updated at Tue Mar 6 07:41:23 2012 by default ! boot system stack-unit 5 primary tftp://10.11.200.241/dt-m1000e-3-a2 boot system stack-unit 5 secondary system: B: boot system stack-unit 5 default tftp://10.11.200.241/dt-m1000e-3-b2 boot system gateway 10.11.209.254 --More-- File System Management The Dell Force10 system can use the internal Flash, USB Flash, or remote devices to store files. The system stores files on the internal Flash by default, but you can configure it to store files elsewhere. To view file system information: Task View information about each file system. Command Syntax show file-systems Command Mode EXEC Privilege The output of the show file-systems command (Figure 3-9) shows the total capacity, amount of free memory, file structure, media type, and read/write privileges for each storage device in use. Figure 3-9. show file-systems Command Example FTOS#show file-systems Size(b) Free(b) Feature Type Flags 2143281152 2000785408 FAT32 USERFLASH 15848660992 831594496 FAT32 USBFLASH - - - network - - - network - - - network Prefixes rw flash: rw usbflash: rw ftp: rw tftp: rw scp: You can change the default file system so that file management commands apply to a particular device or memory. To change the default storage location: Task Change the default directory. Command Syntax cd directory Command Mode EXEC Privilege Getting Started | 49